Development
Ukraine’s fiber-optic drones get squeezed by AI data center demand
November 10, 2026 Development Source: Ars Technica
Share this article
To get a better sense of how drone warfare has increased demand for optical fiber technology, Russia alone bought more than 37 million miles (60 million kilometers) of fiber-optic cable in 2025, according to The Insider and Russian business publication Vedomosti. That means Russia’s purchases amounted to more than 10 percent of all fiber produced worldwide last year, when it had previously never accounted for more than 1 percent of global demand.
The global AI boom and ongoing data center buildout have also strained optical fiber supply, with an expected worldwide shortfall of 111 million miles (180 million kilometers) in 2026, according to the market research firm TrendForce. That has further increased the cost of optical fiber purchased by Russia and Ukraine, including the bend-insensitive fiber that is especially coveted for fiber-optic drones.
One Ukrainian drone manufacturer navigating these supply-chain challenges is BlueBird Tech, which produces fiber-optic drones along with other military drones, a ground robot, drone detection systems, and electronic warfare systems. Ars reached out to BlueBird Tech to learn more.
The following Q&A represents written responses from Oleksiy, a BlueBird Tech R&D representative, after an initial conversation with Ars. The responses have been lightly edited for clarity. Oleksiy is only being identified by first name for security reasons.
So there are significant advantages, particularly when operating in an electronic warfare environment, but there are also limitations in terms of operation, pilot training, and cost.
Because of the high density of electronic intelligence and electronic warfare systems on the battlefield, using conventional radio-controlled FPV drones has become increasingly difficult.
Fiber-optic technology provides a way to operate in these conditions, although it also comes with certain limitations.
So today, both sides are using fiber-optic drones on the battlefield, but radio-controlled drones still make up the larger share overall.
Ars Technica: What are the main disadvantages or limitations of fiber-optic drones?
Oleksiy: One of the biggest limitations today is cost. If we compare fiber-optic prices in 2025 and 2026, we have seen increases of roughly six to 10 times. The most difficult period in terms of prices and shortages was around March. Since then, the situation has stabilized to some extent.
But the underlying issue remains that the material primarily comes from China. That means Ukrainian manufacturers depend on Chinese supply, logistics, availability, and pricing.
There is also broader global demand for fiber-optic material. FPV drones are only one application. Data centers around the world consume large amounts of fiber, and the growth of AI infrastructure is also contributing to demand.
So Ukrainian drone manufacturers are operating within a much larger global market for fiber optic, and that affects both availability and price.
Ars Technica: How are Ukrainian manufacturers adapting to these supply-chain and quality challenges?
Oleksiy: One important change is that many manufacturers are moving the spooling process in-house. Instead of buying a finished fiber-optic spool for an FPV drone, they can buy the fiber in much larger spools and produce the smaller drone spools themselves.
This does not remove the dependence on China for the material itself, but it gives manufacturers more control over the finished product.
Quality is a major reason for doing this. We have seen problems and defects in finished spools supplied from China. By doing the spooling themselves, manufacturers can introduce their own quality-control procedures and achieve a more consistent result.
It can also make the finished spool somewhat cheaper than buying a finished product in China and transporting it to Ukraine.
But quality is the most important factor. If a fiber-optic spool has a defect, you can lose the drone, lose the mission, and lose the target.
Fiber optic is also not the only component in this supply chain. Media converters are another component manufacturers need to source, and China is important for that supply as well.
Russia also has more direct logistics with China, so from a practical supply-chain perspective it has an easier route for sourcing this material.
Ars Technica: Are there other important supply-chain challenges beyond availability and price?
Oleksiy: Yes. Logistics is another important factor. Once the material reaches Ukraine, it still has to pass through customs and then be transported to manufacturers.
Air raid alerts can interrupt this process. Customs operations and other parts of the logistics chain may stop during alerts, which adds time before the material reaches the manufacturer. So companies have to take these delays into account when planning production.
There are also security considerations. I cannot discuss specific cases involving attacks on fiber-optic production because of security restrictions. But manufacturers are potential targets for the enemy, so security measures are extremely important for developers, suppliers, and manufacturers.
Ars Technica: Is the physical transportation route from China to Ukraine also a challenge?
Oleksiy: Yes. The route from China to Ukraine is much longer, and that creates challenges in terms of both time and logistics costs.
So the problem is not only obtaining the material itself. Manufacturers also have to account for the time and expense required to transport it over a long distance.
Ars Technica: How do these price, logistics, and supply-chain challenges affect how a drone manufacturer approaches fiber-optic systems?
Oleksiy: Planning becomes extremely important. You need to plan production and logistics together. If you understand your manufacturing requirements in advance, you can plan your logistics and your next orders accordingly.
Having more of the manufacturing process under your own control is also important.
Quality is another major factor. If the fiber has fewer defects, you can produce more usable FPV spools from one large spool of material. If there are many defects, you ultimately produce fewer usable spools from the same amount of fiber.
So production planning, logistics planning, in-house manufacturing capabilities, material quality, and the skills of the people doing the work are all closely connected.
When people first learn the process, they naturally make mistakes and create defects. They need practical experience to improve.
Training itself also consumes fiber-optic material because people have to practice the actual manufacturing process.
So developing skilled personnel is another part of scaling production. The goal is to develop the skills required to manufacture consistently high-quality spools with as few defects as possible.
Ars Technica: What makes manufacturing a fiber-optic spool technically difficult?
Oleksiy: You need to understand a lot about the fiber itself, about the spooling process, and about what happens when the fiber unwinds from the spool during operation.
Fiber-optic cable is fragile and can be damaged or broken relatively easily. If something goes wrong during manufacturing or while the fiber is unwinding, you can damage the fiber and lose the connection.
That is why practical experience is so important. You need to practice the manufacturing process, and that can require many kilometers of fiber just for training.
The equipment used for spooling also matters. If you use low-quality equipment or the equipment is not configured properly, you can introduce more defects into the finished spool.
So both the equipment and the people operating it affect the quality of the final product.
Ars Technica: How automated is the spooling process?
Oleksiy: It depends on the type of equipment. Some systems require more manual involvement, while others are more automated.
But even with automated equipment, skilled personnel are still required. Someone has to configure the equipment correctly and understand how the process works. The way the system is set up also affects the quality of the finished product.
So automation does not remove the need for expertise.
Ars Technica: How do manufacturers test the quality of finished fiber-optic spools?
Oleksiy: There are different levels of testing. Every finished spool should be checked to make sure the optical link itself is working properly.
But if you want to ensure consistent production quality, that is not enough. You also need to take a portion of the finished spools from a production batch, install them on actual FPV drones, and fly them under real conditions.
That allows you to test not only the optical connection itself, but also whether the finished spool performs properly during an actual flight.
So every spool should undergo link testing, while some of the finished spools from each production batch should also be tested in real flights. That combination is important if you want to maintain consistent quality in production.